The One with the... Entry Way Makeover

They say that first impressions are important.  Other than curb appeal, the entry way is the first thing that guests see when they come through the front door.  Although I had painted the entry way a light brown/tan color, I still felt like it needed some "umph."   Here's what our entry way looked like: 
 
Here's another picture with the table that's usually in the corner: 

Another view of the side wall: 

For inspiration and ideas, I turned to Pinterest, where I found this pin:  

And this pin: 



Both of these entry ways feature "board and batten" wainscoting   This is exactly what I was looking for for our entry way!  Thanks to the many other bloggers who have posted  detailed instructions for how to install board and batten wainscoting-- like this blog and this blog -- we were able DIY it! 

Not only did we decide to add the board and batten to the main entry way, we also thought it would be nice to go into the adjacent hallway that goes to the half bath, future home office/craft room, and the stairs to the basement.  This is what that hallway looks like: 

The first thing that Dave did was sketch out a 3D drawing of the entry way and what the board and batten would look like.  He's gotten really good at using the Google Sketchup program.   Having a 3D drawing really helps visualize what the final product might look like.     


Here's the 3D drawing of the hallway: 

When I saw the 3D drawing, I thought the height of the board and batten was a little low. So I made Dave hold up boards to different heights so I could decide how high I wanted it. 



In addition to the board and batten, there was the issue of the eyesore -- the return vent.   It is the original vent cover that has been painted over many times.  Unfortunately it's also a weird size so I couldn't find a replacement at Home Depot. 



Although there are lots of companies online who will custom make a decorative vent cover, they all cost at least a few hundred dollars.  Not wanting to spend that much money on a silly little vent cover, I looked to trusty Pinterest to see if others had any creative ideas.  Lo and behold, I found this blog where they made their own vent cover out of sheet metal and molding!  

Off to Home Depot we went to buy all of the supplies (SUPPLIES!).  We ended getting 1" x 4" MDF for the battens.  While we had the option of getting real wood battens, it would have been more expensive and wood can expand and contract depending on the temperature and moisture in the air.  The MDF came in 12 foot lengths and in order to  easily transport them in our car, we had Home Depot cut most of them in half and then a few in 8 ft and 4 ft.  

The first thing I did was prime the bottom half of the wall. Once the primer dried Dave marked horizontal lines for the top battens.  Obviously we wanted the top to be at the same height around the whole room, but we couldn't just measure from the ground up because a 40 year old home isn't exactly level anymore.  Our only option was to use a level and chalk line to draw out the lines.  From there, Dave measured out the lengths of the top boards and cut all of the pieces using his miter saw.  He even mitered the corner pieces so they would flow nicely and not end abruptly.    

Here are some in progress pictures with the battens up:




Angling the battens in the hallway was probably the most difficult.  There was a point where Dave took out his graphing calculator and started doing trigonometry.  Being the perfectionist he is, Dave wanted to make sure that he was cutting the battens at the correct angle.  I would have just eyeballed it, but that's why he does the measuring and cutting and I just paint. ;) 



Usually in a board and batten project most people also replace the baseboards, too.  However, we didn't want to replace the baseboards because it runs into the adjacent rooms and it would look awkward if there were two different baseboards.  To maintain the flow and continuous look of the baseboards, Dave cut the batten pieces at a 45 degree angle:             


For the vent cover, we picked up a sheet of aluminum in the "union jack" design and some simple molding at Home Depot.
  


After filling in the nail holes, using joint compound to cover up the seams, and about 4 coats of white paint, the board and batten was done!  I also had to touch up some of the light brown/tan paint on top and paint two coats of it in the hallway.  We borrowed our neighbor's nail gun for the job, without which this could have been a very difficult project. The whole project took us about 2.5 weeks total, which included working two weekends and in the weekday evenings when we had time.  It was actually a lot more labor intensive than we had expected and planned for, but in the end, we're really happy that we did it!    

Here's the finished project:


View of the side walls: 



Views of the hallway:



Here's the new vent cover: 

It looks so much better than what we had before and we can still take it off to clean the vents when needed!  

Now the door jams and doors look dated and dirty next to the bright new white painted board and battens. I guess I know what project I'm doing next... 

Read more...

The One with... Curb Appeal!

As you can probably guess, HGTV is one of our favorite TV channels. On the HGTV show "Curb Appeal," designers and a crew help give a homeowner a makeover to the exterior of their home.  During our walks around the neighborhood with Pluto every evening we notice and comment on the homes that look nice from the street and we often talk about the changes we would make to give our house some "curb appeal."  Before we jump into the details of this project, let's take a trip down memory lane... 

January 2009 - Here's what the house looked like when we moved in...


March 2010 - With a new roof...


April 2012 - After a little front yard landscaping...

In July we got brand new windows installed throughout the whole house!  When the new windows were in, we quickly realized that everything around it looked a little drab. :(  The shutters looked really faded and so did the front door.  

Here's the front door before.  (Don't mind the creepy creepster in the window and me in my painting clothes in the reflection)



From afar the door looks okay, but if you look up close, you can see that the paint has faded and even started to chip off in certain areas:  



The shutters and the door were all painted this turquoise color.  Even the aluminum around the windows in the dormers and around the garage were the same turquoise.

While we were shopping around for window contractors, we also got some quotes for shutter and front door replacements.  Of course none of it is cheap!  With the big price tag of the windows, we didn't really want to spend another big chunk of money on getting a new door and shutters installed. In hopes of saving money, I researched the possibility of painting the shutters.  Unfortunately, everything I read online said that it was not a good idea to paint vinyl shutters a darker color than it was originally due to the fact that vinyl will contract and expand depending on the heat.  We weren't exactly sure what color the shutters were originally because they are now faded, but we wanted black shutters, which means that we were out of luck. :( 

I ordered some new shutters from homedepot.com and they arrived pretty quickly.  While I was away on a work trip in late July, Dave wanted to surprise me by installing the new shutters.  I ended up coming home a little early so Dave was only able to install half of the shutters.  When I came home, this is what I saw: 



I was SO excited about the new shutters! However, after closer look at them I realized that they were too skinny!  Somehow I made the mistake of ordering the wrong sized shutters for the bottom windows!!!!  They were supposed to be 15 inches wide and instead I ordered the 12 inch ones. I felt SO horrible because Dave had gone to so much trouble and worked so hard while I was gone to put them up! But, he said he wanted to make sure we had shutters that we love...so I ordered the correct size from another company online (homedepot.com didn't have the wider shutters in black).

To reach the shutters on the second floor windows, we borrowed a really long ladder from a neighbor.  Here is Dave carrying the heavy ladder from down the street:



The new shutters are also vinyl and the hardware that it came with required you to pre-drill holes in both the shutter itself and the wall.  Because our shutters sit on top of brick and mortar, Dave had to make sure that the pre-drilled holes were perfect so as to not make a bazillion holes in the mortar.  Luckily having the old shutters actually helped because he could use the same holes in the mortar and simply line up the old shutter with the new one to determine where the hole should be drilled. 

And here are the new shutters!!  

While Dave was installing the shutters, I was working on painting the front door. We wanted a bright red door and we were really careful to pick a good red paint that was neither too candy-apple-y nor too brick-y looking.  We settled on "Indiscreet" by Behr and got the Behr paint and primer in one.  The first thing I asked Dave to do was take down the door so we could sand it down. 



We borrowed a belt sander from another neighbor and because it was so powerful Dave actually did the majority of the sanding.  He sanded down the front of the door to expose the bare wood and I did some of the finer sanding as well as the back of the door (the interior side) using our circular sander.  

I took advantage of the door being off to paint the sides of the door.  After cleaning and sanding, I used Behr "decorator white" interior paint that we had leftover from the bookshelf project.  For the white parts outside I already had on hand Behr "decorator white" exterior paint. (Yay for using up paint!) 


In the picture above you can see the old turquoise-colored storm door.  We wanted to replace the storm door too, but that had to wait until we were at a point where the door could go back up so we could have something to close.  The mosquitoes are out in full force this summer and we're pretty sure Pluto will run away from home if he had the chance. 

Speaking of the dog child, this is what Pluto was up to while we were busy working:


After 5 coats of red paint on the front door and 3 coats of white paint on both sides, I was finally done with the painting!!!  It actually took a lot longer than I had expected because of the drying time.  I could only paint the door once a day because it would have to dry by the time we went to sleep to close.    

Next came the new storm door.  I did some online searching for storm doors before deciding on this one. We picked one out at Home Depot and strapped it onto the top of the SUV.  The instructions said that it would take "45 minutes" to install, but in reality, it took us about 3 hours.  Here is Dave studying the instruction manual and checking to make sure we had all the parts: 



  
The storm door wasn't difficult to install... it was just very time consuming!  We followed each step carefully and read each direction at least twice to make sure we understood it. There were a few cuts needed using a hack saw and we double-checked everything before we cut anything!  The installation started at around 6:30pm and we didn't finish until around 9:30pm (it was definitely dark when we were done).  But, it was all worth it because in the morning, we got to wake up to see the brand new storm door and the newly painted door in the daylight!  

And now... some before and afters! 


Before:


After: 

Before:


After:


Before:


After:


We even got new solar lights for the walkway to give it a finishing touch! 

One of the questions we always get with home projects is "How much money did you save by DIYing it?"  Most of the time we don't really know because we didn't actually get a contractor quote but this time we did!  

Here's the cost breakdown for the front door (all from our local Home Depot): 


And the contractor estimate?  For a new front door, new side panels, and a new storm door installed the estimate was $4,916!!!  We spent about 7.4% of that on the supplies and of course our labor was free!  The cost of our shutters was $265.21 and the contractor estimate was $1050! 

Of course it's not really fair to compare apples and oranges here because we didn't actually get a brand new door.  But we love how our "old door" looks now with a makeover.  With the new door seal, stop, and tape that Dave put in around the door jam, the door opens and closes so effortlessly! So to us it IS a new door!  And the best part is that we didn't have to spend almost $5,000!! It definitely pays to DIY! 



    

Read more...

The One with the... Half Bathroom Makeover

For the longest time I've wanted to redo the half bath on the main floor of the house.  When we moved into the house over 2.5 years ago, we had an ugly salmon-colored toilet with a wooden seat.  See exhibit A:  


We immediately changed out the toilet for a new white toilet but didn't have the chance to do anything else.  The walls in the half bath were painted a semi-gloss off white, just like the rest of the entire main floor of the house, and all the fixtures and hardware in the half bath were gold.  See exhibits B, C, and D: 
Gold mirror with a gold faucet and a light fixture from the 1970s!


Earlier this year we finally got around to tackling the half bath and give it the makeover that it desperately needed!  The first thing that needed to go was the ugly light fixture. I had been eyeing pendant lights online and settled on this one from Home Depot.  I liked the clean and modern look of the light fixture and the fact that it would accommodate up to 100 watts.  

Typically, changing out a light fixture is a relatively easy job for Dave. Unfortunately, this switcharoo required a little more effort.  As you can see in the picture of the original light fixture above, the pendant light isn't exactly centered above the sink and vanity.  The previous owners had rigged the light so that it would appear centered by using a hook.  We knew that we did not want the new pendant light to be off-centered because we knew that it would annoy us every time we saw it.

First, Dave cut a rectangle out in the ceiling and took out the junction box. 


Then, he installed a new junction box in the new centered location.  If you look closely, in this picture below, Dave is pointing at the outline of the old light.   As you can see, it was only about a 6 inch move to the left.  


Dave traced out and cut a piece of drywall to fit into the rectangular opening. 

Dave had to screw in a piece of 2 by 4 across the floor joists so that he would have something to screw the new piece of dry wall into. Then he used fiber glass tape at the seams. 


And then used joint compound to cover everything.  After the joint compound dried came the the fun task of sanding the ceiling.  
  
With the sanding done, we moved onto the next task.  We decided to add some wainscoting to the bottom half and paint the bathroom blue!  One of our friends recently installed wainscoting at her house and gave us some good advice.  Following her advice, we ordered two of the same kits from Home Depot.  Each kit comes with 8 ft of mdf wainscoting, 8 ft of baseboard, and 8 ft of chair railing, all of which are pre-primed and ready to paint.    

First we took everything out of the bathroom so we could have a little more room, including the tank of the toilet and the baseboards. 
  

In order to get the baseboards out with the pry bar without damaging the wall Dave used a scrap piece of plywood against the wall.    



With the plumbing unhooked and the vanity out, there is actually enough room to move around in the half bath. 

To take advantage of the vanity being out I decided to paint it so it wasn't the same exact oak color as the floor.  We went with a dark blue/gray color called Anvil by Martha Stewart (color matched to Glidden brand paint) 

And since I was painting already, the mirror would get a paint job too!


While I was painting, Dave started installing the wainscoting.  We borrowed a nail gun from one of our favorite neighbors, which proved to be a HUGE help.  First Dave cut the baseboards to size and fit them nicely in where the old baseboards sat.  Next he installed each panel of wainscoting piece by piece and nailed each into place.  We contemplated using glue in addition to the nails, but decided against it because with the nails and the overlapping panels, the wainscoting was pretty secure.  


Dave was moving swimmingly around the room until he got to the window.  We have large front windows on the first floor of the house, so this window is 56 inches tall.  As with all of our previous projects, Dave needed a new power tool in order to complete this one.  He had been itching to get a table saw for a while now and to be fair it probably would have made his life much easier if we had a table saw a long time ago.  So, we finally splurged for a Dewalt table saw.  (In case you didn't know, Dave is a snob when it comes with power tools... he only buys Dewalt brand, unless they don't make the power tool he wants).  

To get the wainscoting to wrap around the window seamlessly, Dave taped a piece of butcher paper and drew out the shape that he would need to cut.  



Then he cut the paper and traced it onto the wainscoting.  
Then used the jigsaw to cut out the shape. (Dave said "I probably should have used a router," which means we probably could have had another excuse to buy another power tool) 

Then repeat the same thing on the other side of the window. 

After Dave was done installing the wainscoting, but before he put on the chair railing, I painted the walls.  Because the half bath is so small and we have so much leftover paint, I reused the same blue paint that we had from another project.  The color is Misty Surf by Behr. 

And in an effort to get rid of all the gold things in the house, we switched out the faucet to chrome.  

Another thing that we're trying to do around the house is to switch out the outlets to GFI outlets wherever needed.  This outlet is right by the sink and really needs a GFI outlet for safety.  The good thing is that Dave has done this so many times around the house that he's now a pro! 



Another thing that I've been eyeing is a towel ladder like these, which I've pinned on my Pinterest board.


Being the awesome husband he is, Dave built me my very own towel ladder!  Compared to the other projects I've asked him to do, this was a cinch!  Using two 2 x 3s and two long 1.25 inch dowels, he put this together in no time.  We weren't worried about the sturdiness of the ladder because it's purely decorative and would only hold hand towels Dave just put a little of wood glue to secure the dowels. 


With all the mini projects completed, here is the new half bathroom!  The newly painted vanity and mirror, new faucet and vanity handles along with a new soap pump.   

The towel ladder-- primed and painted. 

The other side, with a new toilet paper holder. 

The new pendant light fixture

And just this weekend, we completed the half bathroom makeover by framing and putting up the water color art that we picked up on our recent cruise on the Baltic Sea.  We got three prints of Møllenstien, considered the most beautiful street in Aarhus, Denmark.  These prints jumped out at us because we thought the colors would work nicely with the blue wall. Not only that, the artist himself was selling the prints by the cruise ship and we enjoyed talking to him!  


As reference, here is a picture I took of Møllenstien.  It really was a very pretty street! 

   
With the wall art up, the half bathroom makeover is complete! 

Read more...
Related Posts Plugin for WordPress, Blogger...

  © Blogger template Shush by Ourblogtemplates.com 2009

Back to TOP