The one with the... Baby Nursery (Part 3 - Textiles)

With the large furniture items in the nursery completed, we move onto other projects, specifically those involving more fabric and textiles.  

Dave's mom gave us this bassinet to use.  It was the same bassinet that Dave and all his siblings used as babies as well as most of his nieces and nephews.



Pluto so nice to test out the bassinet for his baby brother:  



We wanted to change up the bassinet covering to match our nursery decor, so I once again went to Pinterest to find some ideas. I found this bassinet with a simple white skirt and a black ribbon trim on the bottom:  


So off to the fabric store I went to get some thicker white fabric and navy ribbon. I was able to reuse the inner lining of the bassinet (the bowl part) but unfortunately there was no real easy way to sew the bassinet cover other than using the measuring tape, eyeballing it, and a lot of pinning.  This is what I started with for the skirt: 


Once the skirt was done, I sewed the decorative navy ribbon on the top and added a larger and smaller ribbon trim towards the bottom: 


Probably the hardest part of the bassinet was covering the hood.  I pinned the fabric onto the hood and sewed elastic on the top and bottom for the outside fabric.  Then I had to hand sew the outside fabric to the inside fabric, which took a while. (I now understand the wonders of a thimble!)  I realized that there was a small gap between the hood and the base of the bassinet so I sewed a small flap to cover the gap and then covered the seam with more navy ribbon. 

Here is the finished bassinet!  Front view:    
  


Back view.  See the little flaps on the hood?



Side view:


Even before we turned the room into a nursery, I already had these Ikea Merete curtains in "Bleached."  I am a fan of curtains with grommets and at $28 for a pair of 57'x98" curtains, it is a steal!  They're pretty thick curtains and although they are not room darkening, they do block out some of the light.   
But white curtains seemed a little boring for the nursery, especially with all the white furniture the bottom half of the wall being white as well.  I found this post on Pinterest for DIY painted striped curtains.  It looked easy enough and I figured it wouldn't be a huge deal if I messed it up because I only spent $28 on the curtains themselves.  


First I hung the curtains up and hemmed them to the right length.  Next, I started measuring the curtains to mark it and tape where I the stripes to be.  While trying to measure out stripes I learned two important lessons: 1) it's not easy to measure the fabric and make straight lines and 2) trying to work on the floor and being 32 weeks pregnant doesn't work so well together. Dave came to my rescue and not only did he have an ingenious idea of how to draw out the curtains, he also helped me finish the task no time! 

Dave recommended that we just measure the two ends and then use a chalk line to draw a horizontal line. From there it was super easy to put down the blue tape so we could paint! He also reminded me that when they are hanging, the stripes on the curtain aren't going to look exactly straight anyway so no one would know if they are a little off. 


For the navy stripes we used the same BM Old Navy paint that we used on the dresser and nightstand.  Following the tutorial, I added textile medium to the paint.  Warning: the curtain eats up A LOT of paint. Using foam rollers we painted two coats, taking off the tape and then retaping in between coats.  After the two coats, we were done! Or so we thought...

When we hung the curtains back up and up against the light, we quickly realized that there were some spots that we missed.  So I took a foam brush and touched up the spots. Easy peasy, right?  Unfortunately, for some reason the touch up paint looked different from the rolled-on paint and the curtain looked very splotchy. :(  By then I was also running out of the BM paint and I decided that it wasn't so economical to use good quality paint on curtains. So I went to Home Depot and just got some cheaper paint color-matched to BM Old Navy.  But the HD paint quality was slightly different and we ended up having to paint 3 more coats before the paint looked even and not splotchy.  What seemed like an easy project took us a really long time!!    

So lesson learned for anyone who is planning on painting curtains: 1) make sure you use the same paint and premix a lot of it with the textile medium. Then use that same mixed paint on every coat!  2)  Do not try to spot paint with a brush because it will look splotchy.  It's better just to roll on another coat.  3) Always pull off the tape before the paint dries!  
    

Here is one of the finished painted striped curtain panels in the nursery: 


As I mentioned in the post about the nursery furniture, the crib was the only piece of furniture that we got new.  My sister and brother-in-law got us a convertible crib as a gift for the baby!  After Dave put the crib together I started looking into a crib skirt.   

I liked this crib skirt from Pottery Barn but was not willing to pay $60 for it!   



So I searched for tutorials for how to make a crib skirt and found this post:



The nice thing about making an adjustable crib skirt is that you can move it up and down based on the height of the mattress. The drop-side cribs were declared to be "unsafe" so newer cribs are made so that you adjust the mattress up and down.  The crib skirt I made is actually just long pieces of fabric with ribbon sewed on the top that tie to the metal base.  As the crib gets adjusted lower, I can retie the crib skirt so that it is higher and not dragging on the floor.       

Here's the finished crib skirt: 


That's it for the bassinet, curtains, and the crib skirt!  In the next post, we'll share how we cut the nursery door in half (whaaaaat?)  

Read more...

The one with the...Baby Nursery (Part 2 - Furniture Makeover)

Now that the nursery is all painted, we move onto furniture!  With the exception of the crib, we got all of the furniture in the nursery used and some of it was even free!  

Dave's sister Susan, who is a super mom with 6 kids of her own that have all outgrown their baby stuff, gave us this changing table:   


It's nice and solid and just needed a new piece of wood and a fresh coat of paint!  


Dave cut a new piece of plywood to go on the top layer for the changing pad.  And after some sanding and a few coats of white paint, we were good to go!  In the meantime, I had been looking for baskets or bins to go underneath for storage.  After failing to find anything in the right size at Home Goods, TJMaxx, Target, Container Store, and Michaels, I finally found these Canvas bins at Walmart!  They were inexpensive AND they were free because on a walk with the dog one day I found a Walmart gift card randomly in the street.  I got a pack of two large bins and a pack of the three medium bins in navy blue. 

Here's the changing table after the makeover and with the bins:     


We also got a large dresser and matching night stand off of Craigslist for the nursery.  I knew we were going to refinish any furniture we bought used, so all I cared about was that the dresser and night stand was solid wood and of good quality.  We picked up these babies for $120 total!     

Nightstand before: 

Dresser before:

These two took a lot more time to refinish than the changing table.  First Dave took off the hardware and sanded down every surface with the belt sander with 60 and 100 grit sandpaper.  Then he switched to the orbital sander with 150 grit and 220 grit sandpaper.   After the sanding, we painted a coat of primer and then sanded some more. 

For the paint I went to the our hardware store that carried Benjamin Moore (BM) paint and at first I was looking for some no-VOC, no-odor BM paint.  But when I was there the very helpful folks at the hardware store introduced me to BM's Advance paint. 
Advance has the qualities of oil paint in a waterborne formula that cleans up with soap and water.  It is also self-leveling and is highly recommended to be used for painting furniture.  

   
The only downside is that you have to wait 16 hours in between coats!  Staying with the color scheme that we picked out for the nursery, I went to trusty Pinterest for ideas. This dresser was the inspiration for the color combination:


For the navy color, we chose BM's Old Navy and the white was BM's Decorator White.  The Advance paint was a lot pricier but we thought it was totally worth it because of the quality and also how easy it was to apply.  The whole painting process took a LONG time mainly because of the drying time in between coats.

Meanwhile I took the knobs and pulls and lightly sanded them and then spray painted them with multiple coats of Rustoleom's Universal Metallic spray paint in Satin Nickel:



And here's what we ended up with... Nightstand after:


Dresser after:



Dave's sister also gave us a glider, which just so happened to be white and navy! However, the cushions were a little worn out from use with multiple kids and her youngest got some sort of grease on the ottoman.  But the glider itself was in perfect shape and we were more than happy to have it!  All it needed was some new cushions and new upholstery.  


Once again I turned to Pinterest for ideas and tutorials on how to redo the glider. I found a few helpful tutorials online here and here. In the end, I basically concluded that I should just use the existing cushions as templates to make the new ones.   So off to the fabric store I went with my coupons in hand. I ended up getting 3 inch thick heavy duty foam, 4 yards of navy blue fabric, and a roll of batting.  

Dave took apart all of the cushions and removed the foam/fluff that was inside so that we could use the cover as templates. Then he started working on the ottoman and I started sewing!  We borrowed an electric staple gun from a neighbor for the ottoman (have we mentioned that we have the best neighbors?!) Dave cut out a piece of foam that was slightly larger than the board of the ottoman so that it would cover it completely.  Then he stapled down the foam wrapped in batting.  Next came the fabric itself. We quickly realized that using a striped fabric wasn't the smartest thing because we had to make sure the stripes stayed vertical to the ottoman.  


For all the other cushioned pieces of the glider I wanted to make sure that the covers were removable and washable.  I made sure to wash the fabric first before I started cutting just in case it shrinks in the wash.  Then I went, piece by piece, sewing the fabric together and adding on zippers to make them removable.  I also sewed straps with velcro on the back and seat cushions so that they could be secured to the glider itself without sliding down or off.  We did the arm cushions last because those were actually the most difficult.  The cushions themselves are  secured to the glider itself with snaps.  We couldn't reuse the snaps from the old cushions so we had to get new ones.  During another trip to the fabric store we got this heavy duty snap kit, which actually comes with the tool to secure the snaps to the fabric itself.  Thankfully Dave did all the securing of the snaps because it did require a bit of muscle power.  

Here's the glider after the makeover:


That's it for the nursery furniture!  We saved a lot of money by making over used furniture and paid for it in labor and time.  Although it's a lot of work, in the end, we are always glad we took the time and effort to do these types of projects because it's 100% customized.  Hopefully one day the baby will appreciate all the work we did on his nursery!  Special thanks again to Susan for passing on the changing table and the glider!  


Read more...

The one with the... Baby Nursery (Part 1 - Wall Paint)

Wow, it's been almost 9 months since our last blog post.  And there is good reason for it! You see, we've been a little busy... because any day now, we are expecting a baby boy!  

Back in June we were finally able to start working on the nursery.  We had one empty bedroom that we had planned to use as the baby's room, so we cleaned out the random stuff we had in there and got to work.  First project on the list-- painting! 

Here's what the room looked like before.  The walls were a Tiffany blue color from the previous owners.   


The room is actually a pretty good size.



With a substantial closet, especially for a little baby.


When you open the closet, you get a nice surprise.  It was painted a chalkboard paint that was mossy green!  Doesn't that look so great next to the Tiffany blue?  Also, notice that all of the trim and the doors are an off-white color.   

First task was to pick out a paint color!  By June we knew that we were having a boy!  I didn't want to paint the room the typical "baby blue" or "baby green" or even "baby yellow."  I wanted a color that was a little more neutral and would last a while as our child grew up.  A neutral color would also allow us to use various accent colors to dress up the room however we want!  

Of course Pinterest had some good ideas, including this striped wall:


Board and batten in white on the bottom and navy on top: 


And yellow wall with navy and white accents:


All of these nurseries are super cute and had their own charm.  In the end, the color scheme that we decided on included: gray, white, navy blue, and yellow.  We also decided to add a chair rail and paint the top gray and the bottom white.  

We measured out where we wanted the chair rail and used the chalk line to mark it. From there, I primed the bottom half and painted it with Behr Decorator White paint in a high gloss that we already had on hand.  I figured that the high gloss would be easy to clean when the baby is crawling and walking around and touching the wall with his dirty hands/fingers.  



The closet also got primed and multiple coats paint.  I had to get Dave to help me with painting the closet because there were certain parts of the closet that I couldn't get to easily, being 7 months pregnant and all... 




Then I painted the top half of the room in Benjamin Moore's Bunny Gray.  After I finished painting two coats of Bunny Gray, Dave installed the chair rail.  We borrowed a nail gun from our neighbors, which was really helpful for putting up the chair rail.  Oh, and once the Decorator White paint went in, all of the other parts of the room looked very yellow-- including the crown molding, window trim, baseboards, and closet doors). They all got a few coats of the same Decorator White paint.   

The high gloss paint is a little thick and I didn't want paint brush marks on the molding.  I had read about a product called Floetrol, which when added to paint, thins it out a little but increases the drying time so it limits the brush marks.  I picked some up at the local Sherwin Williams paint store and it worked like a charm!  


 Here's what the room looked like after all of the painting.  TADA!





Notice that the door is still off-white. We had some big plans for the door-- stay tuned to find out what we did!  


It's amazing how big of a difference paint makes!  The room looked much lighter and brighter with the gray and white paint!  In the next post, we start filling the room with furniture! 



  




Read more...
Related Posts Plugin for WordPress, Blogger...

  © Blogger template Shush by Ourblogtemplates.com 2009

Back to TOP